LBILabFurnishingsCatalog0917

Shelving and Shelving Systems Brushed Zinc Bench Shelving System

All steel components come in a distinctive brushed zinc finish that resembles stainless steel. Wall Standard Cross Member

Peninsula/Island Stanchion 1 1/4” 2”

1/2” slot

1” O.C.

144”

.074”

.5”

1.25”

• General purpose shelving and hang rod • .074” thick steel • On center dimension from counter- sunk screw hole to counter-sunk screw hole is 6”

• Double faced and double slotted • This shelving system is for use be- tween back to back cabinets • Work surfaces are to be specifically bored to receive and secure stan- chions • 16 ga. steel 80-7-SZ 84” L (213.4 cm)

• 16 ga. construction • Cut to fit stanchion spacing 80-12-NS-SZ

144” L (365.8 cm)

36” L (91.4 cm)

44-3

Bookend Shelf Bracket

Undermount Shelf Bracket

Cross Member Splice

6”

12”

R2

12”

Die Punched (2) Ø1/4” holes

1 3/8” Lip

• 14 ga. steel • (2) die punched 1/4” diameter holes • Works with wall mount standard or stanchion 6X12-L-SZ Left Hand 12” D (30.5 cm) 6X12-R-SZ Right Hand 12” D (30.5 cm)

• 14 ga. tempered steel with stabilizer tab • Keyhole slots for shelf mounting • Works with wall mount standard or stanchion 81-L-12 Left Hand 12” D (30.5 cm) 81-R-12 Right Hand 12” D (30.5 cm)

• 16 ga. construction • Use to connect two cross members for systems for longer than 144” 78 12” (30.5 cm)

U-Clip Mounting Bracket

Base Shoe

End Cap

3

• Fits inside stanchion for the secure attachment to cross member 55000060

• For use as an anchoring plate with peninsula/island upright assembly • 16 ga. construction MNT/PLT-14GA

• Inserted at each exposed end of cross member • Black plastic 13

www.labbuildersinc.com

90