ISDA

Work Surfaces Modular Work Surfaces

Work Surface with Sink Cutout

• Sink cutout 15” x 25” to receive a D55 drop in sink, fixture hole cutout diameter is 1 3/8” • Sink and fixture hole are centered in width of top Width Epoxy Work Surface Phenolic Work Surface 36” (91.4 cm) LE3630-D55 LP3630-D55 48” (121.9 cm) LE4830-D55 LP4830-D55 • Work Surface for end island sink cabinets • Sink cutout 15” x 25” to receive a D55 drop in sink, fixture hole cutout diameter is 1 3/8” • Sink and fixture hole are centered in width of top Width Epoxy Work Surface Phenolic Work Surface 54” (137.2 cm) LE5427E-D55 LP5427E-D55 60” (152.4 cm) LE6027E-D55 LP6027E-D55

36” or 48”

30” (76.2cm)

End Island Sink Work Surface

60” or 54”

27”

Corner Cabinet Work Surface

• Work surface for a corner cabinet • Rear top over hang is 7” Width

39”

Epoxy Work Surface Phenolic Work Surface

LE37CB-1

LP37CB-1

39” (99.1 cm)

30”

39”

135

135

12 5/8”

30”

Corner Cabinet Work Surface with Sink Cutout

• Work surface for a corner sink cabinet • Sink cutout 15” x 18” to receive a D30 sink, fixture hole diameter is 1 3/8” • Rear top over hang is 7” Width Epoxy Work Surface Phenolic Work Surface 39” (99.1 cm) LE39CB-D30 LP39CB-D30

39”

30”

39”

12 5/8”

30”

www.isdanetwork.com

48