ISDA

Hoods and Enclosures Fume Hood Fittings and Accessories

Bench Fume Hood Work Tops

These modified black epoxy resin work tops are dished to retain spills. They are available with or without a drop in cup sink hole. Cup sinks are found on page 53.

Bench Fume Hood Width

Part Number w/o Cup Sink

Part Number w/ Cup Sink Cutout (Left)

Part Number w/ Cup Sink Cutout (Right)

Part Number w/ Cup Sink Cutouts (Both Sides)

4’-0” (121.9 cm) 5’-0” (152.4 cm) 6’-0” (182.9 cm) 8’-0” (243.8 cm)

WL-48B WL-60B WL-72B WL-96B

WL-48BCSL WL-60BCSL WL-72BCSL WL-96BCSL

WL-48BCSR WL-60BCSR WL-72BCSR WL-96BCSR

WL-48BCSB WL-60BCSB WL-72BCSB WL-96BCSB

These three sided ceiling enclosures are designed to fill the space between the top of the hood and the ceiling up to 24” (61 cm) in height to provide a clean finished appearance. The enclosure is cut to fit in the field and includes a slip to fit ceiling finish trim angle. Fume Hood Width Part Number 4’-0” (121.9 cm) CE048P-NA-24GH 5’-0” (152.4 cm) CE060P-NA-24GH 6’-0” (182.9 cm) CE072P-NA-24GH 8’-0” (243.8 cm) CE096P-NA-24GH This adjustable fume hood face filler is designed to close off a space between a fume hood and a wall up to 18” (45.7 cm) wide. This face filler is cut to fit in the field and includes a slip to fit finish trim angle. Product Part Number Fume Hood Face Filler FTL-22ADJGG This adjustable hood ceiling filler is designed to close off the space above the hood face filler and adjacent to the ceiling enclosure Product Part Number Fume Hood Ceiling Enclosure FRH-ADJ As a safety or energy conservation measure, a sash stop may be added to any of our hoods. It may be mounted at any distance above the lower deflector vane to keep the sash from rising past that point. When needed, the stop may be piv- oted out of the way. Product Part Number Gravity Sash Stop SP01 Adjustable Height Fume Hood Ceiling Enclosure (A) Fume Hood Face Filler (B) Fume Hood Ceiling Filler (C) Gravity Sash Stop

B

A

C

27

www.isdanetwork.com