INSTOCK® Quick Delivery Lab Outfit Program

Hoods and Enclosures High Performance Bench Fume Hoods - Combination Sash High Performance Fume Hood allows for reduced face velocities resulting in energy savings of 40-50% over standard hoods. These fume hoods are the result of extensive testing and R&D, producing the safest and most adaptable hoods. They provide superior energy savings through this functional design. The expansive interior is enhanced by a 43” tall sight line with a 17” high glass observation panel. Features: • Combination vertical rising / horizontal sliding sash

• Fume Hood is available pre-wired • 24” (61 cm) deep clear interior • 24” clear sash opening • Standard 43” (110.5 cm) tall full view sash area • Easy conversion from CAV to VAV use • Chemically resistant white Polyglass liner • High Performance perforated rear baffle

• Designed to safely capture and contain at 60-100 FPM • Chain and sprocket sash mechanism for ease in operation • Tempered glass sash with full-length formed steel handle for a neat, clean appearance and streamline air passage • Stainless steel round duct collar(s) transitions • Fume hoods that are not stocked have a lead time of 8-10 weeks. Technical Data: These hoods are UL1805 listed and are tested in accordance to ASHRAE-110. All hoods are pre-wired to a junction box on the roof of the hood with two 120 volt AC 20 amp GFCI receptacles on the side posts, LED light, 20 amp light switch and a duplex for an alarm on the roof. Each front post and interior end liner is punched and capped for up to five (5) remote control service fittings. The left hand post is punched for a second electrical fixture at the top which may be used for a fan switch or other electrical device. The right post is punched and covered for an alarm. Service fittings, fan switch, work top, cup sink, alarm, and base units must be ordered separately.

60 FPM @ 24” Max Sash Opening 380 CFM

80 FPM @ 18” Max Sash Opening 380 CFM

80 FPM @ 50% Horizontal Open 380 CFM

Static Pressure Loss

Static Pressure Loss

Static Pressure Loss

Clear Interior Depth

Duct Size

Cat. No.

Hood Width

F-351-48G5 4’ (121.9 cm) 24” (61 cm)

1:12”

0.12”

0.12”

0.12”

F-351-48G5D30 4’ (121.9 cm) 30” (76 cm)

1:12”

380 CFM

0.12”

380 CFM

0.12”

380 CFM

0.12”

F-351-60G5 5’ (152.4 cm) 24” (61 cm)

1:12”

500 CFM

0.11”

500 CFM

0.11”

500 CFM

0.11”

F-351-60G5D30 5’ (152.4 cm) 30” (76 cm)

1:12”

500 CFM

0.11”

500 CFM

0.11”

500 CFM

0.11”

F-351-72G5

6’ (182.9 cm) 24” (61 cm)

1:12”

620 CFM

0.17”

620 CFM

0.17”

620 CFM

0.17”

F-351-72G5D30 6’ (182.9 cm) 30” (76 cm)

1:12”

620 CFM

0.17”

620 CFM

0.17”

620 CFM

0.17”

F-351-96G5 8’ (243.8 cm) 24” (61 cm)

2:12”

860 CFM

0.15”

860 CFM

0.15”

860 CFM

0.15”

F-351-96G5D30 8’ (243.8 cm) 30” (76 cm)

2:12”

860 CFM

0.15”

860 CFM

0.15”

860 CFM

0.15”

www.instocklabs.com

100

Made with FlippingBook Annual report