Fisherbrand ™ wood laboratory cabinets are made from hand selected premium rift cut oak or rotary cut maple veneers, featuring a solid mortise/tenon top frame, doweled, glued and screwed European construction. Robotically applied environmental friendly finishes are chemically resistant resulting in beautiful board room quality furniture. Cabinets have a full flush overlay design with squared edges. They are vertically grain matched and are stained inside and out allowing for relocation during laboratory remodeling. All of our products are supported by a 2 year warranty. Contact your Fisher Scientific ™ Sales Representative for other sizes and styles available. We bring quality, warmth and durability to your laboratory.
All four corners of the drawer box are dovetailed.
Drawer bottom is white hardboard let into birch drawer sides, secured underneath by a continuous bead of glue.
Separate drawer face is attached to drawer box and vertically matched.
Drawer sides are sanded smooth, have a coat of baked on catalyzed conversion varnish, and grooved to receive the drawer bottom.
Drawer glides are side mounted, zinc plated, ball bearing, 100 lb. heavy duty, full extension.
Solid hardwood intermediate rails are bored, doweled & glued into end panels. Drawer separators are let into the front & rear intermediate rails.
Top frame members are solid hardwood components, mortise & tenon construction, glued, bored, doweled & screwed into end panels. Front frame member has lumber edging.
Glides are side mounted, zinc plated, ball bearing, 100lb. heavy duty, full extension.
Back is 1/4” hardboard with color blended face let into end panels.
Hinges are 5-knuckle, heavy duty, laboratory grade stainless steel.
Right and left sides of each cabinet are finished
Squared edges, full overlay, solid door construction with lumber edging.
Bottom is 3/4” hardwood plywood with lumber edging.
Wire pulls are laboratory grade stainless steel.
Toe & rear anchor rails are 3/4” hardwood plywood, bored, doweled & glued into end panels.
Adjustable shelves are 3/4” hardwood plywood with lumber edging. Shelves over 36” wide are 1” thick.