CurrentGraingerLabFurnishingsCatalog0618

Hoods and Enclosures Fume Hood Fittings and Accessories

Fittings for Fume Hood

External Vacuum Breaker Shipped loose and installed in field.

These WaterSaver brand remote control fittings consist of a brass an- gle valve with a replaceable seat, an epoxy coated brass nylon color-cod- ed panel flange with angle serrated hose connector, a remote control rod assembly with a plastic flange and a tank nipple, locknut and washer. Fit- tings may be used on either side of hood. Shipped loose and installed in field.

Fitting Type Air (Orange)

Part Number

Fitting Type

Part Number

External Vacuum Breaker

45MK67

45MK63 45MK64 45MK65 45MK66

Gas (Dark Blue) Nitrogen (Brown) Vacuum (Yellow)

These WaterSaver brand remote control fittings consist of a brass angle valve with a replaceable seat, and epoxy coated brass nylon color-coded panel flange with a gooseneck with a vacuum breaker, a remote control rod assembly with a plastic flange and a tank nipple, locknut and washer. Shipped loose and installed in field. Cold Water Fitting for Fume Hood

These WaterSaver brand remote control fittings consist of a brass angle valve with a replaceable seat, and epoxy coated brass nylon color-coded panel flange with a gooseneck without a vacuum breaker, a remote control rod assembly with a plastic flange and a tank nipple, locknut and washer. Shipped loose and installed in field. Cold Water Fitting for Fume Hood

Fitting Type

Part Number

Fitting Type

Part Number

Cold Water with Vacuum Breaker

45MK69

Cold Water without Vacuum Breaker

45MK68

Fume Hood Alarm

Fan Blower Switch

Each INSTOCK fume hood is fully pre- punched, for the fast and easy installation of this alarm. The TEL AFA-1000 provides a digital read- out of the fume hood face velocity and sounds an alarm when the airflow falls below safe levels. Consisting of a ther- mostat sensor (mounted through the side

Manual fan motor starter switch, toggle style, single pole, with red pilot light, stainless steel cover plate, 1 thermal unit, for 1 HP maximum motor size

Product

Part Number

wall of the fume hood) and a monitor (mounted on the fascia), the unit gives both a visual and audible alarm. A glowing green light signals when conditions are safe. The monitor also contains a test/reset button allowing the user to verify alarm readiness. The TEL AFA-1000 operates on a 9V DC circuit and comes complete with an adapter that is plugged into a pre wired 120 VAC recep- tacle on the roof of the hood.

For use with a 1 HP fan For use with a 2 HP fan

45MK81

2510FS2P

Product

Part Number

Fume Hood Alarm

45MK80

Building Labs That Shape The Future

33